A+B̉ Fast Epoxy Paste
 This two
part epoxy mixes to a smooth, paste-like consistency that holds to
vertical surfaces. It can fill holes or be feathered to a fine edge.
It cures to a white color making it ideal for caulking. This fast
set version hardens in less than ten minutes, and makes a final,
steel-hard cure in 2 - 3 hours. Cures underwater.
9915 – White
Package – 141Gram (5 oz) Kits
70 Gram (2.5 ounce) Tubes of A + B®
|
Provides a durable
and permanent bond to: |
|
Metal |
Copper |
Chrome |
|
Iron |
Wood |
Most Plastics |
| PVC |
Fiberglass |
Concrete |
|
Brick |
Stone |
Glass |
|
Porcelain |
Tile |
Ceramics |
|
Pottery |
Countless other materials |
|
Some Suggested Uses: |
|
Repair breaks, cracks or leaks in all types of plumbing fixtures
and ceramics– tubs, toilets, sinks, tiles, caulking |
|
Seals leaks in gasoline tanks and air conditioner systems |
|
Insulating cable splices |
|
Mounting electrical components |
|
Sealing plant compressed air lines |
|
Repairs on plumbing systems |
|
Sealing water leaks |
|
Mending caulking around sinks, tubs, and tiles |
|
Mending furniture, vases, dolls |
|
Preventive wrap for key elbows where masonry or other work will
encapsulate water and gas lines |
|
Attaching golf club shafts to golf club heads |
|
Mixing and Handling |
|
Using A + B® Epoxy Paste is
amazingly easy, simply squeeze out equal parts of the A + B®
tubes on a disposable mixing surface. |
|
Mix together for about one minute
or until the colors merge. Make sure there are no streaks. |
|
Gloves are advisable for mixing
and handling the epoxy paste. |
|
Make sure the application surface
is free of gas, grease, oil, rust, dirt, or debris. Smooth
surfaces should be cleaned with a solvent. Roughing or
sanding the surface is recommended. |
|
Apply the paste with the mixing
stick, allowing 6 – 10 minutes work life. |
|
A + B® Epoxy Paste can be
feathered and is ideal for bonding surface to surface and
filling small cracks. |
|
Let it harden and cure for the
specified time: Sets-up in 10 minutes and makes a final,
steel-hard cure in 2 - 3 hours. |
|
Clean all tools, reusable gloves,
and hands, if necessary, with soap and warm water immediately
after use. |
"When quality performance is a must........A+B̉"
|
